Buying a new furnace may not be a concern in the immediate future. But it’s smart to know the things that will likely impact your choice when you’re ready to buy. Here are seven things you’ll want to think about when you're due for furnace replacement in Fort Worth.
1. Size and Installation Quality
To run at maximum efficiency and comfort, your furnace must be properly sized for your home. When it involves furnaces, bigger is definitely not better. We often get requests from customers to install a big furnace in the mistaken belief that a larger furnace is either more reliable or will offer better comfort.
The reverse is true. Large furnaces will short cycle, or constantly turn on and off. This leaves you uncomfortable, with higher energy bills and a furnace that could wear out much sooner.
This is why it’s important to work with the right company when purchasing a new furnace. Even if it’s the correct size but improperly installed, the U.S. Department of Energy says you could forfeit as much as 30% of your energy efficiency.
Another key component of installation is ductwork. If yours is old or improperly designed, you might have problems with noise or comfort. A furnace is only as effective as the duct system it’s attached to.
At Stark Services, our Expert HVAC technicians are ACE certified, which means they’re skilled in repairing and installing various types of home comfort systems. Besides technical skill, our technicians are also trained in treating you ethically. We also support our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are ranked by a term called AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this rates the annual gas consumption of a furnace. The higher the number, the less gas is spent during the heating process.
If your present furnace is 15 years old, it’s likely ranked well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re throwing away up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work today:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—best efficiency rating available.
3. Blower Motor Technology
As you evaluate new furnaces there is one more important thing to consider: blower technology. This part moves air throughout your home. And it also uses a lot of electricity, so it’s important to be familiar with your options.
There are three kinds of blowers available on furnaces nowadays. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a standard blower motor that’s been mostly unchanged for the past 30 years. This motor is the least expensive and also the least energy efficient.
- Constant torque motor. This technology strikes a balance between price and energy efficiency. It delivers an electrical efficiency boost over a standard motor design.
- Variable-speed motor. The most energy-efficient furnaces can run at different speeds. Instead of operating at full blast 24/7, they will quietly operate at a low or medium speed at times. This helps improve your comfort while keeping energy costs down, both in the winter and summer. And it also keeps indoor humidity in check.
4. Sound Reduction Technology
Sound has become a very significant consideration with furnace installation, so another great improvement has been keeping noise under control. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Nearly silent gas burners
With this technology, you might not even notice that your furnace is on.
5. Smart Thermostat
You probably use a programmable thermostat, but chances are you probably aren’t making the most of your energy savings. These thermostats can be challenging to program, particularly if your schedule changes from day to day.
A smart thermostat eliminates all the guessing about energy efficiency. Many models can pick up on your temperature preferences and then create an energy-saving schedule to match. They also recognize when you’re home or away and will adjust your heating and cooling as needed.
As a bonus, you’ll also be able to keep tabs on and change your settings from just about anywhere on your phone. Some models can even alert you if they detect a problem with your furnace or remind you when it’s time to replace your air filter.
There’s a major difference in furnace quality and reliability. Like any big purchase, we think it’s best to go with a major brand name. With a top brand like Lennox® or Goodman®, you’ll have more confidence in the technology and that the manufacturer will uphold its product warranty over the long haul.
Furnaces usually have two primary warranty coverage areas:
- Heat exchanger. This is the heart of the furnace and the most expensive component to replace. This part usually has a 20-year limited warranty or lifetime limited warranty, but this can vary based on the manufacturer and furnace model.
- Main parts. This includes the blower motor, electronic controls, ignitors and other key parts. Warranties can range from as short as a one-year limited warranty to as much as a 10-year limited warranty.
When going over warranty coverage, it’s essential to know it's limited. So, you should make sure you get the limitations. For instance, nearly all standard manufacturer warranties only include the price of the replacement part, not labor. And labor on a replacing heat exchanger could get costly.
Once your new furnace is running, make sure you finish the product registration immediately. Many manufacturers may reduce the warranty term if the product registration is not completed. This step is easy and usually only takes a few minutes.
How much does all this cost anyhow? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency system.
As you consider these costs and the affect on your budget, remember that unlike nearly every other appliance you may need to purchase, your new furnace may help pay for itself from the monthly energy savings it offers.
A couple of additional ways to save include:
- Getting a new air conditioner at the same time.
- Buying at the ideal time, such as in early fall, mid-winter and early spring. You may be able to get additional discounts and rebates during this slower season.
- Reap the benefits of rebates from the federal and state government, as well as from your local utility provider. We can help you navigate this process.
- Finance your new furnace or sign up for our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll get a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to search for in a new furnace, when should you replace your outdated one? Here are a few tips from our Experts that will help you decide.
Heating systems typically last 15–20 years. How long yours will keep going depends on whether you’ve done furnace maintenance, where you live and your temperature preferences. If you’re somewhere with harsh winters, your furnace will run more often, potentially making it wear out faster. The same goes if you like to keep your home at a hotter temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces age, the potential for frequent furnace repair increases. If your system is more than 15 years old, those repairs can be particularly costly. Common and expensive repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are more than the half the price of a new furnace, it’s generally best to replace it.
Furnaces older than 15 years can be extremely inefficient. You could be wasting as much as 30% of the money you spend to keep your home warm. Excessive energy costs and the desire to decrease energy consumption are also strong reasons to consider replacing your furnace. In fact, an independent study by Decision Analyst shows nearly 20% of homeowners who recently replaced their furnace specifically did so to reduce their energy bills.
Trust Your Furnace Replacement to the Experts
It can feel overwhelming trying to investigate furnace features on your own. Or recognize exactly when you should replace your furnace. Our Stark Services Experts are here to make the process much simpler. Contact us at 817-668-6689 or schedule an appointment online to request your free home comfort assessment today.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.